I have a general idea of what I want to do, but its still not definite. I started work on the base today. Check it out so far.
I used a Chieftec Dragon Case (purple) I had lieing around.
![Image](http://img518.imageshack.us/img518/7311/21050342100x10000jv6.jpg)
Original Case Gutted.
![Image](http://img341.imageshack.us/img341/5630/dsc05493mz7.jpg)
![Image](http://img151.imageshack.us/img151/5300/dsc05495sx9.jpg)
Started the Base
![Image](http://img180.imageshack.us/img180/8434/dsc05496hv9.jpg)
![Image](http://img213.imageshack.us/img213/9967/dsc05497dv1.jpg)
![Image](http://img246.imageshack.us/img246/4802/dsc05498uu6.jpg)
![Image](http://img139.imageshack.us/img139/678/dsc05499qa7.jpg)
----------------
Worked on the reservoir today. Its basically an old CDR stack cover with plexi on the front. Ill let it dry overnight, possible pictures tomorrow.
![Image](http://img85.imageshack.us/img85/2467/conceptrersul4.jpg)
Also worked on side door. Cut out my holes for my RED plexi side window. You can see where I marked on the front where the reservoir will be too.
![Image](http://img255.imageshack.us/img255/4817/dsc05509vi5ry4.jpg)
I have the base painted black although it is drying still. Needs one more coat.
----------------------
Worked a bit more this weekend. I have to wait until my barb fittings come before I finish it.
![Image](http://img138.imageshack.us/img138/5360/dsc05513mb7.jpg)
almost 100% finished base.
![Image](http://img180.imageshack.us/img180/199/dsc05515qs8.jpg)
![Image](http://img267.imageshack.us/img267/9231/dsc05514hq5.jpg)
![Image](http://img507.imageshack.us/img507/1947/dsc05517nb9.jpg)
![Image](http://img229.imageshack.us/img229/7776/back2fk4.jpg)
![Image](http://img228.imageshack.us/img228/877/dsc05520ch6.jpg)
---------------
After sanding, I wanted to remove all my scratches.
![Image](http://img152.imageshack.us/img152/3782/dsc05522zx2.jpg)
![Image](http://img184.imageshack.us/img184/7536/dsc05525ou4.jpg)
Primed, Edges aren't smooth because I'm adding rubber molding. I didn't want to get that exact if I wasn't going to see it.
![Image](http://img184.imageshack.us/img184/9054/dsc05526wd5.jpg)
![Image](http://img295.imageshack.us/img295/874/dsc05527lr6.jpg)
-----------------------
I have been working on the resovoir mostly this week. I didn't like how the glue around the nozzles was stringy and rough, so I filled the top with epoxy. Made it look MUCH better. I also am alot more confident it wont LEAK, It hasn;t yet
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](http://img100.imageshack.us/img100/2456/1011468mj1.jpg)
![Image](http://img166.imageshack.us/img166/3600/1011466bp9.jpg)
----------------------
I worked on setting up for liquid cooling today. Cut the hole in the bottom for air flow. I'll put pics up when I take it off again.
![Image](http://img127.imageshack.us/img127/5277/1011498ur4.jpg)
![Image](http://img216.imageshack.us/img216/3498/1011499yq9.jpg)
![Image](http://img216.imageshack.us/img216/8996/1011500li6.jpg)
![Image](http://img127.imageshack.us/img127/6199/1011501jo0.jpg)
![Image](http://img216.imageshack.us/my.php?image=1011502gi7.jpg)
Today was also interesting and a learning experience. "DON'T PRESSURIZE YOUR LINES" They tell me, yet do I listen...
In short i filled it with water to check for leaks, the reservoir exploded basically, sending water everywhere. I was about 80% filled too. Luckily The epoxy was what cracked and not my actual tank. So I just resealed all of the nozzles, and this time added a fill cap rather then a valve. No pressure in the tank this time. I'll fill it tomorrow.
The Damage
![Image](http://img127.imageshack.us/img127/3834/1011509zw8.jpg)
Check out the new one.
![Image](http://img127.imageshack.us/img127/5734/1011511pi5.jpg)
![Image](http://img127.imageshack.us/img127/6/1011512yu7.jpg)
Continued on Page 2